Adaptronic serial driver for WinLog - C. Backshell 9/2011 - www.efi-parts.co.uk
-------------------------------------------------------------------------------

* Provided as is - no warranty or guarantee expressed

* Tested with WinLog v1.02





INSTALLATION INSTRUCTION
------------------------

1) Install WinLog

2) Copy the contents of this ZIP file to a fresh directory (not the WinLog install directory)

3) Launch WinLog

4) Go to File, Open Dashboard, Navigate to your new directory, Open "Adaptronic.dsh"

5) Go to View, Device configuration, "Add"

6) Select "Have disk" and navigate to the directory where you have stored the drivers (the files in this ZIP).

7) Select the Adaptronic driver for the apropriate COM port. **

** NOTE: The dashboard configuration is set for the COM1 driver.  If you are using a different driver it
will be neccessary to right-click on each of the gauges, go to Edit, Properties and select the input
device from the driver you have installed. (It will show "Adaptronic on COM1" currently)





C. Backshell
9/2011

www.efi-parts.co.uk